Owner's Manual
AFTER STORAGE
When taking your motor out of storage, follow the procedure below to return it to operating condition:
Thoroughly clean the spark plugs. Replace them if necessary.
Check the gear-case oil level and if necessary, add gear oil according to the procedure outlined in the GEAR OIL section.
Lubricate all moving parts according to the LUBRICATION section.
Check the engine oil level.
Clean the motor and wax the painted sur faces.
Recharge the battery before installing it.
GENERAL INFORMATION
WARRANTIES (For U.S.A)
The warranties covering your outboard motor are explained in a separate Limited Warranty booklet given to you at the time of sale. Please read this booklet carefully so you can under stand your rights and responsibilities.
IDENTIFICATION NUMBER LOCATION
The model and identification numbers of your outboard motor are stamped on a plate attached to the clamp bracket. Record these numbers below for future reference. It is important to know these numbers when you place a parts order or if your motor is stolen.
Model Number:
Identification Number:
If equipped with Keyless Start System:
Emergency key Number:
