Nuestros almacenes están cerrados los días 26 y 27 de noviembre. ¡Feliz Día de Acción de Gracias!

De confianza desde 2005★★★★★ 4.7/5 estrellas

Los pedidos de PartsPak.com serán procesados y enviados por Crowley Outdoors. Para soporte, llame al (800) 580-0720.

Owner's Manual DF200A Operation[Shifting And Speed Control]

Owner's Manual DF200A Operation[Shifting And Speed Control]
Suzuki Marine

Step 1: SHIFTING AND SPEED CONTROL

Severe engine damage may occur if (a) engine speed is not allowed to return to idle and boat speed is not reduced when shifting from “FORWARD” to “REVERSE” or from “REVERSE” to “FORWARD”, or (b) care is not taken when operating the boat in reverse.
Always allow the engine speed to return to idle before shifting. Exercise caution and use minimal speed when operating the boat in reverse. Be sure the handle/shift lever is in the desired position before accelerating.

If you shift gears when the engine is not running, the shifting mechanism can be damaged.
Avoid shifting gears when the engine is not running.

Shifting
To shift into “FORWARD”, squeeze the lock-out lever on the control handle and move the control handle forward to approximate position (A), as shown in the illustration.

To shift into “REVERSE”, squeeze the lock-out lever on the control handle and move the control handle rearward to approximate position (B), as shown in the illustration.

A detent or notch is present on all Suzuki control boxes to provide a “feel” for positions (A), (B), and neutral. Always shift quickly and firmly from neutral to position (A) or (B) to prevent abnormal wear on the gear and clutch engagement surfaces.

Top mount type
Not equipped with a lock-out lever. Exercise care when selecting neutral position.

Speed control
To increase speed after you have shifted into gear, continue moving the control handle forward or rearward.

Since the same handle is used for shifting and speed control it is possible to move the handle past the detent and engage the throttle. This can cause the boat to move suddenly resulting in personal injury or property damage.
You must be careful not to move the control handle too far forward or rearward when shifting.