SPC SYSTEM ELECTRONIC CALIBRATION
Electronic calibration is required before use. After installation of this product, the Suzuki Precision Control system requires electronic calibration, only by a person who has been specifically trained in the Suzuki Precision Control system. Improper electronic calibration of the system will make this product and/or the system inoperable or unsafe for use.
To perform electronic calibration, a battery powered personal computer and the Suzuki Diagnostic System software Version 5/ hardware must be used.
For the Suzuki Diagnostic System Version 5 operation, refer to “Suzuki Diagnostic System Version 5 Operation Manual.”
Required tool
The necessary tools are as follows.
| Tool name | Part number | Q’ty |
|---|---|---|
| Suzuki Diagnostic System software Version 5 set | 09933-19810 | 1 |
| • Diagnostic harness | 1 | |
| • USB adapter | 1 | |
| • USB cable | 1 |