INSTALLATION OF SIM (Suzuki Interface Module)
• Install the SIM avoiding direct rays of the sun and water splash.
• Face the connector downward when installing the SIM.
• Place the SIM to a dry and protected place where the ambient temperature does not exceed 75 °C (167 °F).
• Before installing and removing the electric parts, turn the main switch OFF and remove the battery cable from the battery. When disconnecting the battery cable, remove the negative cable first and then the positive cable. When connecting the cable, connect the positive cable first and then the negative cable.
Install the SIM with two (2) screws.
See the figure below for the installing dimensions
SIM (Suzuki Interface Module)
