AFTER STORAGE
When taking your motor out of storage, follow the procedure below to return it to operating condition:
Thoroughly clean the spark plugs. Replace them if necessary.
Check the gear-case oil level and if necessary, add gear oil according to the procedure outlined in the GEAR OIL section.
Lubricate all moving parts according to the LUBRICATION section.
Bleed air from the oil injection system according to the AIR BLEEDING section.
Clean the motor and wax the painted surfaces.
If air exists in the oil injection system, serious engine damage may result.
Use a 50: 1 gasoline/oil mixture a few hours after an extended storage period.
Recharge the battery before installing it.
SPECIFICATIONS
Power rated in accordance with NMMA procedure.