Step 1: INSTALLATION OF ACTIVE HUB/PASSIVE HUB
• Install the active hub and passive hub avoiding direct rays of the sun and water splash.
• Select a dry and protected place where ambient temperature does not exceed 75 °C (167 °F).
• Bind all the wires of the wiring harness with a clamp or the like at an area within 30 cm around the hub to protect the connectors from damages.
• Before removing or installing electric parts, turn OFF the main switch and remove the battery cables from the battery. When disconnecting the battery cable, remove the negative cable first and then the positive cable. When connecting the cable, connect the positive cable first and then the negative cable.
Install the active hub and passive hub with 2 screws.
See the figure below for the installing dimensions.
Step 2: Active hub/passive hub
