FALL CLEARANCE: 10-50% discount on all OEM parts!

Unless prohibited by manufacturer. Does not include aftermarket products. Priced as marked.

Trusted Since 2005★★★★★ 4.7/5 Stars

PartsPak.com orders will be processed and fulfilled by Crowley Outdoors. For support please call (800) 580-0720.

Owner's Manual DF25 V-TWIN Storage Procedure

Owner's Manual DF25 V-TWIN Storage Procedure
Suzuki Marine

STORAGE PROCEDURE

MOTOR STORAGE

When storing your motor for a long period of time (for example, at the end of the boating season), it is recommended that you take your motor to your authorized Suzuki Marine Dealer.

However, if you choose to prepare the motor for storage yourself, follow the procedure outlined below:

  1. Change the gear oil as outlined in the GEAR OIL section.

  2. Change the engine oil as outlined in the ENGINE OIL section.

  3. Add a high quality fuel stabilizer to the fuel tank according to the instructions on the stabilizer can.

  4. Flush the water passages in the motor thoroughly. Refer to the FLUSHING THE WATER PASSAGES (Engine running) section.

  5. Readjust the water flow, run the engine at about 1500 r/min in neutral for five minutes to distribute the stabilized fuel through the engine.

  6. Stop the engine. Then turn off the water and disconnect the flushing attachment.

  7. Lubricate all other specified parts. Refer to the LUBRICATION section. Spray entire powerhead with a rust preventative (not a penetrating oil product).

  8. Apply a coat of automotive wax on the external finish of the motor. If paint damage is evident, apply touch up paint before waxing.

  9. Store the motor in an upright position in a dry, well-ventilated area. Select an area with constant temperature to avoid corrosion caused by condensation. Do not store next to furnaces, heaters, etc.

When the engine is running, keep your hands, hair, clothing, etc., away from the engine.

Never start the motor without supplying water to the cooling system as water pump damage could result in as little as 15 seconds. Severe engine damage could result from no water supply.

BATTERY STORAGE

  1. When the outboard motor will not be used for a month or longer, remove the battery and store it in a cool, dark place. Do not set battery on concrete or earth, as this will accelerate loss of charge.
  1. Wash the casing and terminals using fresh water only, then dry with clean cloth.

  2. Fully charge the battery. If the battery will be stored for a long period of time, check the specific gravity of the fluid at least once a month and recharge the battery when the charge is low.

• Explosive vapors are produced by batteries. Do not smoke, and keep battery away from open flames and sparks. To avoid creating a spark when charging the battery, connect the battery charger cables to the proper terminals before turning the battery charger on.
• Handle the battery with extreme care; avoid skin contact with electrolyte. Wear proper protective clothing (Safety glasses, gloves, etc.)