Step 1: MAIN SWITCH (OPTION)
If equipped with Keyless Start System:
Turn the Keyless Start System to ON or OFF state by as follows.
(1) Make sure that the key-fob is within the communication range of the keyless control unit.
(2) Turn the main switch to the “ON & OFF” (“ ”) position and then release it. The main switch automatically returns to the “PUSH START/STOP” position.
When the Keyless Start System has been turned to ON state by operating the main switch, all lamps in the monitor-tachometer will continue to light and the buzzer will also sound for the first two seconds.
If equipped with Dual Engine:
When either one of the engines of Keyless Start System is turned ON or OFF, another engine will automatically be turned ON or OFF.
If the operation in the above step (2) is performed continuously, it is regarded as a theft or tampering and the main switch operation will not be accepted until a certain period has elapsed.
Step 2: BEFORE ATTEMPTING TO START THE ENGINE
- Lower the motor into the water.
- Make sure that the motor fuel hose and the hose from the boat’s fuel tank are securely attached and clamped.
- Make sure the motor is in “NEUTRAL”.
